Code Alarm CATX9000 5-Button Replacement Transmitter Remote 915MHz FCC H50T36 H5

Description

Code Alarm CATX9000 5-Button Replacement Transmitter Remote 915MHz FCC H50T36 H5
Code Alarm CATX9000 5-Button Replacement Transmitter Remote 915MHz FCC H50T36 H5
Code Alarm 5 button replacement transmitter remote
FCC ID: H50T36 H5OT36
FM, spread spectrum technology (SST), 915MHz, blue LED
Programmable to the following models: SRT9000
You will need to use the system's valet switch (programming/override button) to perform the programming procedure
TRANSMITTER PROGRAMMING
Note: This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is exceeded, the security system will start deleting transmitters from memory in chronological order. To program transmitters:
1. Turn the ignition ON.
2. Press and hold the valet/override button.
3. Within 10 seconds the system will chirp/flash the parking lights (3) three times, release the button.
4. Press Button 1 of each transmitter you wish to program. The system will respond with 1 chirp for each accepted transmitter (up to 4).
5. Turn the Ignition OFF to exit programming. The system will also exit programming after 15 seconds of inactivity.
Note: This system has 1 button programming which programs all channels of the system.
Listing and template services provided by inkFrog